GARANT 921401, Instruction Manual

Page: 46 / 532

en
GARANT Workbench with electric height adjustment
3.9.2. Battery
 Store in a place that is as cool as possible but frost-free.
 Remove the battery from the workbench, store it in an enclosed dry room.
 Store the battery in its closed and undamaged original packaging.
 Always store the battery upright, not on its side or overhead.
 Keep fully charged when in store.
 Every six months, recharge the battery to 75 % state of charge.
i
Reduction of the charge capacity of the battery due to cumulative ageing in use.
4. Commissioning
4.1. INITIAL COMMISSIONING
Mobile workbench with battery (Art. No. 924611 - 924617)
4.1.1. Installing the battery
(Fig.
A
)
i
Only an electrician may install the battery.
1. Open the original packaging.
2. Grip the battery by the carrying handles and take it out.
» Keep the original packaging for subsequent storage and transport.
3. Open the side compartment.
4. Place the battery in the side compartment.
» Ensure adequate circulation of air. Check the distance from the rear panel.
5. Plug the mains cable supplied into the 230 V-AC input connection on the rear face of the bat-
tery.
6. Insert the mains plug for the control module into the 230 V-AC output connection on the front
face of the battery.
4.1.2. Charging the battery
(Fig.
B
)
1. Insert the mains plug into a mains socket.
2. The battery is being charged and can be used whilst charging is in progress.
4.1.3. Switching the battery on
(Fig.
C
)
1. Keep the power button depressed.
» The start menu will appear.
» POWER is pre-selected.
2. Confirm with OK.
4.1.4. Switching the battery off
(Fig.
D
)
Instruction manual 46