Page 4
4-20
0-20
bi10
P
OUT
0-5
.
There are seven selectable output ranges available. To view the current value press
then use to
scroll through output types. Select and save required option by pressing
bi 5
Analog output Selec on
EWS-102 CONTROL UNIT MULTI ANALOG
SYSTEM SETUP
www.garan.co.uk
0-24
Output type 4-20mA.
4mA = no load, 20mA = full load
Output type 0-20mA.
0mA = no load, 20mA = full load
Output type 0-20mA.
0mA = no load, 24mA = full load
Output type 0-5V.
0V = no load, +5V = full load
Output type +/-5V
-5V = no load, 0v + half load, +5V = full load
Output type +/-10V
-10V = no load, 0v + half load, +10V = full load
Sensor Signal Input - Negative
Reverse connection of sensor signal leads
Insufficient Sensor Signal
Installation Error - Contact Garan
Sensor Offset Too High - Positive
Installation Error - Contact Garan
Sensor Offset Too High - Negative
Installation Error - Contact Garan
Trying to calibrate without Control Signal link
Sensor not connected to EWS
Fit link between control signal terminals
Connect sensor/check sensor wiring
CODE
ERROR
CAUSE/SOLUTION
ERR1
Err3
Err4
Err2
Err5
Err6
ERROR CODES
Firmware 5.5 Rev 1 s
e
a era i
