WALL CABINET, RESIN ASSEMBLY INSTRUCTIONS
STEP #7 THE CABINET IS READY FOR MOUNTING ON EITHER TEKPANEL OR TEKTRAK.
DOOR CLOSING ADJUSTMENT
–
WHEN THE CABINET IS INSTALLED, THE EASE OR DIFFICULTY OF CLOSING
THE DOORS CAN BE ADJUSTED BY TRIMMING THE HEIGHT OF THE BUTTONS SHOWN IN THE ABOVE IMAGE.
BUTTONS ARE ON THE TOP AND BOTTOM OF EACH DOOR.
BELOW ARE PHOTOS OF SEVERAL OF THE ABOVE STEPS FOR REFERENCE.
STEP #3 - INSTALLING POSTS STEP #4 A - SCREWS IN SIDES
STEP # 4B
–
MOUNTING BRACKET, 6 SCREWS STEP # 6B
–
INSTALL SHELF CLIPS / SHELF
PG 5 QUESTIONS ???? CALL 1-866 664 2724 REV 1, 10/11
