WALL CABINET, RESIN ASSEMBLY INSTRUCTIONS
SEE ADDITIONAL REFERENCE PHOTOS ON PAGES 5 THRU 7 TO MATCH THE DIAGRAM STEPS BELOW.
ITEM QTY DESCRIPTION
CARTON #1
A 2 BASE / TOP
B 6 SIDE / DOOR PANEL
C 2 SHELF
D 8 CAP
E 4 HINGE
F 1 HANDLE SET (L/R)
G 2 SCREW, 1 1/2" LG
H 2 SCREW, 7/8
”
LG
I 8 SHELF CLIP
J 1 BIN
K 1 LABEL
CARTON #2
L 4 POST
M 1 MOUNTING BRK
N 12 SCREW, 1
”
LG
STEP #1: LAYOUT FROM THE CARTONS AND CHECK THE PARTS RECEIVED.
STEP #2:
ORIENTATE QTY 1, BASE / TOP (A) WITH THE CURVED EDGE FACING FRONT AS SHOWN. PRESS
PANELS (B) OVER THE POSTS.
PRESS THE QTY 4, HINGES (E) ONTO TWO PANELS (B) AS SHOWN, PLACE THE BOTTOM HINGES INTO THE BASE
HOLES AND THEN PRESS QTY 1, BASE / TOP ONTO THE TOP OF THE PREVIOUSLY SEATED PANELS & HINGES.
REMEMBER TO ORIENTATE THE TOP WITH THE CURVED EDGE TO THE CABINET FRONT.THE CABINET BODY IS
COMPLETE.
PG 2 QUESTIONS ???? CALL 1-866 664 2724 REV 1, 10/11
