www.AVOutlet.com
The intermediate position has been setup.
AUTOMATIC SETTING OF THE LIMITS
(Just for motors with electronic limit switch)
For limits set with torque sensor (mechanical stop of shutters or cassette awnings/shades), press and
hold
UP
button until the bottom bar hits the cassette or shutter box.
A short jog will indicate that the UP position has been memorized. The same procedure can be followed
for DOWN limit
but only for roller shutters.
INTERMEDIATE POSITION SETUP (Fig. 7)
(Just for motors with electronic limit switch)
Stop the shutter/awning in the desired intermediate position, then press simultaneously the UP and
DOWN buttons until the motor makes a brief movement in both directions.
TRANSMITTER FACTORY RESET
The factory reset will un-hide any hidden channels and delete all custom groups.
1.
Remove the battery cover on the back of the transmitter.
2.
Remove the battery.
3.
Press and hold the circle button
while reinserting the battery, once the screen comes back on and
displays,
will appear and the circle button
can be released.
4.
After about 3 seconds the transmitter will start up and all channels will be un-hidden, and any groups
deleted.
FIG. 6
FIG. 7
