58
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
2.9.1
App,
Activation using the mobile App, online mode
Prerequisites
•
The mobile device is connected to the internet
• Having completed the general prerequisites for activation mentioned on
• Own a IIDTool
BT
or IIDTool
Pro
• Own a compatible mobile device (
) with the Bluetooth module turned “ON”
• Having completed installation of the application in the mobile device (
) and have
ensured that it is synchronized with the tool (
• Be aware of warnings and particularities
Note :
It is not required to add the IIDTool in the Bluetooth pairing screen of the mobile device to per-
form a pairing. The Application handles the connection. Disconnect from any other Bluetooth device
before using the IIDTool.
Steps to activate the IIDTool using the App
1- Turn ignition ON without starting the engine (turning the key to “ON, II” or press the “start en-
gine” button without simultaneously pressing the brake pedal).
2- Insert the IIDTool in the vehicle’s OBDII connector
3- Wait 30 seconds until the “ IIDTool Ready ” message is displayed on the instrument pack screen.
This delay is caused by the scan process that detects which ECUs are present.
4- Launch the Mobile Application IIDControl already installed on your compatible mobile device
5- Press “Search for tool” at the bottom of the screen
6- Select the desired tool available in the list (“Available Devices”). If only one device is discove-
red, the App will automatically connect to it.
Figure 27.
App
: Activation -> tool selection
Summary of Contents for IIDTool Pro
Page 190: ...190 IIDTool Appendix...
