第
- 14 -
页
5
.
Engine
usage
、
maintenance
and
fault
solution
5.1Engine
usage
and
cautions
5.1.1 Engine Running-in
Check oil level with oil level window lines. If the oil level lower than the
underline, add fuel to the upper line.
It is not allowed to increase load at cold engine state, preheating engine for
1-3 minutes first.
Engine running-in is very important, new vehicle should drive at 75% speed of each
shift and shift gear often, if running-in not good, more faults will be increased.
Maintain the engine after driving 300km and 1000km, improve the engine working
condition to ensure good engine performance. Maintain the engine after every driving
3000km.
Running-in of engine is very important. 1000 km is stipulated as running-in mileages
.
Running maintenance please refer to 5.2
Mote During the running-in, shift gear often and RPM should be no more than 70%
of max. RPM, accelerator should be no more than 70% of accelerator full opening.
Prohibit It is not allowed to make engine running at big accelerator with idling
Summary of Contents for E02
