6
ZP-EPC10
Product Description
Scope of supply
❚
Protocol converter ZP-EPC10
❚
4 screw clamps
❚
Installation guide
Recommended Accessories
❚
CV12 power supply available from CBC
❚
Cable made to Belden specifications
Summary of features
The ZP-EPC10 protocol converter is designed to convert control signals between
RS422 (full-duplex) and RS485 (half-duplex) protocol. In addition to adjusting for diffe-
rent pin assignments, the unit also converts the protocols used by the CEC C328 video
multiplexer and the SMD-type dome cameras
manufactured by
CBC. A single protocol
converter can support up to 31 dome cameras. It is also possible to cascade up to nine
protocol converters to control a maximum of 256 dome cameras
using a single multi-
plexer.
Both SMD-type and CEC VSD-type dome cameras
(only the former use RS485 proto-
col) may be operated jointly.
The following dome camera functions are supported:
❚
Pan, tilt, zoom, focus, iris
❚
Presets
❚
Writing EEPROM
❚
Start position (Home)
❚
Auto-focus, auto-iris, manual iris control
❚
Automatic pan or tilt function between presets 1 and 2
❚
Control of pan and tilt speed
❚
Camera speed control
☞
Note:
Observe the examples and explanations given from page 15 onwards.
Product Description
