ZN-D212XE installation Guide
01A.01
8
1)
Place the installation template on a
surface where camera is going to be
installed and mark the anchor block
placements.
2)
Drill and insert anchor blocks on a
marked surface.
3)
Mount the main camera body by
aligning the anchor blocks and hold against
the mounting surface..
4)
Tighten the anchor blocks with screws
5)
Connect all the appropriate cables to
the device
6)
Attach the dome cover on main body
and lock it up by rotating.
Caution
!
When placing the dome cover, look for carved triangle mark on both dome cov
er and main body. Both triangles should be aligned together when placing the c
over. Once the cover has been placed, rotate the dome cover for a secure lock.
To detach the cover, rotate the dome cover and align two triangle marks, and
pull the cover.
Caution
!
To prevent products from damaging, place the camera on stable and non-vibrat
ing surfaces. If the stability is in doubt, consult with safety personnel for reinfor
cements, and then proceed with the installation.
