User's Manual - 7
4� Install the “GANZ Installation Tool“ to assign an IP address to the Network Camera� For more
information, please refer to Software installation on page 11 for details�
5� Access to the Network Camera from the Internet� For more information, please refer to
Accessing the Network Camera on page 12 for details�
6. Unscrew the zoom controller to adjust the zoom factor. Upon completion, tighten the zoom
controller. Unscrew the focus controller to adjust the focus range. Upon completion, tighten
the focus controller�
7� Tear down the aluminum foil vacuum bag and take out the silica gel� Attach the silica gel to
the inner side of the Network Camera, then tighten the lens cover� (Please replace the silica
gel with a new one if you open the back cover after installation�)
Note
If you want to use the supplied sun shield for outdoor environments, please follow the steps below to
install:
1 Tighten the supplied two screws
2 Attach the supplied sun shield to the Network Camera and slide it to the desired position
3 Fix the sun shield with the supplied two screws (Please use different screws for ceiling mount)
4 Secure the Network Camera to the wall/ceiling by the supplied camera stand
T
W
∞
N
W
∞
N
T
1
2
3
4
Ceiling Mount
Wall Mount
