Ganz ZN-B2MTP, User Manual

Page: 20 / 50

PixelPro Series
ZN-BxMTP Series
User’s Manual
10-2014-A
20
5.2.3 White Balance Control
WB (White Balance) Mode
WB mode can be set to Auto, Auto (wide mode), Custom (one-shot mode), WB Hold or
Manual.
“Custom” / “WB Hold” functions are available from FW1558 and later.
Auto : ATW (Auto Tracking White balance)
The White balance adjustment setting is used to make the colors in the image appear
consistent, compensating for the different colors present in different light sources.
The GANZ PixelPro camera can be set to automatically identify the light source and
compensate for its color temperature.
Auto (wide mode) : WB adjustment range is wider than Auto mode.
Custom (one-shot mode) : WB will be fixed after adjusted WB in ATW, and then the
mode to be switched to the WB Hold mode automatically.
WB Hold : When the WB Hold was enabled, WB to be fixed.
Manual : When Manual White Balance is enabled, WB mode for the light sources can
be selected from the following fixed mode;
Indoor (2800K), Outdoor (6500K), or Fluorescent (4000K)
5.2.4 Image Property Control
Modify the video signal parameters, such as: Brightness, Sharpness, Contrast, and
Color.
Sharpness (Default: 8, Range: 1~15)
Brightness (Default: 15, Range: 0~30)
Contrast (Default: 15, Range: 0~30)
Color (Default: 15, Range: 0~30)
5.2.5 Lens Adjustment
Adjust the lens (Zoom, Focus & Iris) from this window.
One Push Focus: Camera will automatically adjust the focus.
Default: Back to initial position (wide end).
Note) please click the default button to adjust the lens position to initial position, when
lens adjustment does not worked fine.