SCENE SELECT
PICT ADJUST
EZOOM
DIS
PRIVACY MASK
MOTION DET
SYSTEM SETTING
LANGUAGE
MAINTENANCE
EXIT
MOTION DETECTION
SYNC Mode, Lens, Flip, LCD/CRT, Communication, CAMERA ID
ENG, ESPANOL, PYCCKNN, PORTUGUES, DEUTSCH, FRANCAIS,
中文
,
日本語
W.PIX MASK, CAMERA Reset
SAVE, NOT SAVE, CANCEL
OSD MENU FUNCTION
Normal, Indoor, Outdoor, Backlight, ITS, Custom
Brightness, Contrast, Sharpness, Hue, Color Gain
MAG, PAN, TILT
ON / OFF
PRIVACY MASK SETUP
SETUP MENU
⇦
1/2
⇨
SCENE SELECT
NORMAL
↲
PIC ADJUST
↲
EZOOM
OFF
DIS
OFF
PRIVACY MASK
↲
MOTION DET
OFF
SYS SETTING
↲
EXIT
↲
1) MAIN MENU
2) ADVANCED MENU
Turn the Switch toward Left or Right side, Select Each mode.
ADVANCED MENU
⇦
2/2
⇨
LENS SHD COMP OFF
DEFOG
ON
↲
FLK LESS
OFF
↲
ANTI CR
OFF
RETURN
↲
SETUP MENU
⇦
2/2
⇨
LANGUAGE
ENGLISH
VERSION 1.0
MAINTENANCE
↲
EXIT
↲
・
SCENE SELECT
・
PICT ADJUST
・
EZOOM
・
DIS : Digital Image Stabilizer
・
PRIVACY MASK
・
MOTION DET
・
SYS SETTING
・
LANGUAGE
・VERSION
・
MAINTENANCE
・
EXIT
SAVE
NOT SAVE
CANCEL
BACK
ADVANCED MENU
NORMAL
INDOOR
OUTDOOR
BACKLIGHT
ITS
CUSTOM
・
SUTTER /AGC
・
WHITE BAL
・
HLC / BLC
・
WDR / ATR-EX
・
DAY / NIGHT
・
IR OPTMIZER
ATW
(PUSH)
(USER1)
(USER2)
(MANUAL)
(PUSH LOCK)
OFF
HLC
(BLC)
CONTRAST
CLEAR FACE
AUTO
DAY
NIGHT
BURST
DELAY CNT
DAY -> NIGHT
NIGHT -> DAY
AUTO
MANUAL
AE LEVEL
AGC MAX
SENS UP
BRIGHTNESS
CONTRASY
SHARPNESS
HUE
COLOR GAIN
SYNC MODE
LENS
FLIP
LCD / CRT
COMMUNICATION
CAMERA ID
W.PIX MASK
CAMERA RESET
AUTO
MANUAL
MANUAL
AUTO
DATA CLEAR
☞
ATTENTION
・Simply make the adjustment in the following
order to help make the focusing easier.
☞
ATTENTION
・You may exit from OSD either by SAVE, NOT SAVE to keep, delete, or temporarily
hold the changes that you made.
- Select MANUAL
- Adjust lens focus well
- Then return to AUTO
ADVANCED MENU
⇦
1/2
⇨
SHUTTER/AGC
AUTO
↲
WHITE BAL
ATW
↲
HLC/BLC
OFF
WDR/ATR-EX
WDR
↲
DNR
↲
DAY/NIGHT
AUTO
IR OPTMIZER
↲
RETURN
↲
・
LENS SHD COMP
・
DEFOG
・
FLK LESS
・
ANTI CR
OFF
ON
AUTO
OFF
ON
AUTO
: Anti Color Rolling
ADJUSTMENT
1)
3)
2)
☞
Attention
T
he picture image may deteriorate when
the lens is leaned toward ceiling or wall
to view through the circled vertical area
and the effect may vary depending on the
view angles.
1. Direction and Lens
The camera body is set in a tri-axial mounting
allowing movement in the pan, tilt and rotational planes.
1) Adjust the direction of the lens so it faces the subject
2) Move the lever to adjust focus and angle of view
3) When you finished adjusting the direction of the lens, tighten the locking screw with a screwdriver.
Direction and Enter Guide
Up
Down
Enter
Right
Left
* L-L : Line Lock
* INT : Internal
INT
L-L
2. Switches
1) Slide Switch for Sync. System 2) Multitack Switch for OSD
Use the Slide Switch within the camera Use the Multi Tact Switch within the camera
3. OSD MENU
* Surface mount
This section explains how to install the unit where cables are running through the
interior of the ceiling or wall.
1. Drilling holes in the ceiling or wall: Use the template included to mark out the
position on the ceiling or wall where you want to install the unit.
2. When running cables through the interior of the ceiling or wall : Use the template,
and drill two or three holes for screws used to attach the camera body and one hole
for the cables (Cables).
* Flush mount
- Embedding in the ceiling or wall
Be sure to use the Mouting Adaptor Ring when embedding the unit in the ceiling or wall
1. Drilling holes in the ceiling or wall : Use the template included to mark out
the position on the ceiling or wall where you want to install the unit.* Use the template,
drill 4 holes for screw used to attache the Mounting Adaptor Ring. Then, follow the
perforations on the template and cut out a hole to embed the camera body.
2. Attaching the Mounting Adaptor ring : Attach the adaptor ring to the ceiling or wall to
which you want to attach the camera body. Please use fixing screws suitable for the
material of the ceiling or wall when attaching the camera body. We recommend using
screws with a 4mm diameter.
3. Attaching the camera body : Remove the surface mount cover from the camera
body. Remove the body cover and attached camera body to the Mounting Adapter Ring.
- Attaching to gangbox
1. Remove the surface mount cover from the camera body.
2. Attaching the camera body : Attach the camera body to the gangbox.
Please use screws that are suitable for the gang box.
(Use breakable holes on the camera body bottom)
INSTALLATION
(embedding in ceiling or wall)
(Attaching to a gang box)
Surface mount
Flush mount
* Use the elastic band to
hang the camera unit
upon necessity for the
installation.
WARNING : Do not
release your hands
from the camera
unit until securing it.
* Mounting
Adaptor Ring
(optional)
☞
Attention
Please use fixing screws suitable for the material of the ceiling or wall when attaching the camera body.
The mounting screws provided are not recommended to use at a conditionns.
* Camera Unit
t is not recommended to view through the circledd vertical
area especiallly witth LED light turned on as the picture
image is subject to a LED light reflection.
Since such image deterionration is normal, installers are
encouraged to check the image under LED-ON environment
at the time of installation in order to avoid unexpected image
deterioration.
Attention
The 5-50mm model requires a focusing procedure
with the dome cover being placed in front as shown
in the illustration. The picture may get blurry if the
focusing is done without this procedure.
The positions of focus and
zoom adjustment levers are
reversed on 9-22mm and
5-50mm models.
Attention