Ganz ZC-D5000NXA series, Instruction Manual

Page: 9 / 12

EG-9

Attaching the service monitor
Use the service monitor cable to check and adjust camera direction, focus, and
angle on a service monitor.
The service monitor is not supplied
in the cell. Please have one ready.

Adjusting the camera direction
The camera body is set in a tri-axial mounting allowing movement in the pan, tilt,
and rotational planes.
1
Adjust the direction of the lens so it faces the subject.
350° Pan
350° Rotation
180° Tilt
Indicates the top of
the camera.

Using the camera in a near-horizontal position will show the camera cover on screen.

Forcibly adjusting the camera to point in directions beyond the limits of the mounting
may cause the cable to catch on internal components and damage the camera.
2
When you have finished adjusting the direction of the lens, tighten the locking screw
with a screwdriver.
Locking screw

Adjusting the view angle, focus and iris
Move the lever to adjust focus and angle of view.
Focus/View angle
adjustment lever