Ganz PixelPro ZN-MB260M, User Manual

Page: 36 / 43

PixelPro Series ZN-MB2xx Series
User’s Manual
10-2014-A
36
3) When Firmware upgrade menu is displayed, browse to the desired firmware file
on your computer. Click OK.
NOTE:
Do not disconnect power to the unit during the upgrade. The unit will restart
automatically after the upgrade has completed. (1~5 minutes)
System Reset (Factory Default Reset)
There are two ways to reset the camera back to factory default. holding down about 10-
20 sec the reset button on the Camera
Using the web browser:
1. Go to SETUP > System > Maintenance.
2. Click Factory Default Button and wait 1 minute for camera to reboot.
Using the Reset Button:
1. Holding down 10-20 sec the reset button on the Camera.
2. Release your finger on the reset button, waiting about 1 minute for camera reboot
NOTE:
The unit will now have the default IP address from a DHCP server.
Use the
‘“MultiUpgradeTool.exe” to discover and connect to the camera.