Ganz PixelPro ZN-MB260M, User Manual

Page: 29 / 43

PixelPro Series ZN-MB2xx Series
User’s Manual
10-2014-A
29
9.2 Network > Service Port
Service Port
HTTP port- The default HTTP port number (80) could be changed to any port within the range
1-65535. This is useful for simple port mapping.
RTSP port- The RTSP protocol allows a connecting client to start an H.264 stream. Enter the
RTSP port number to use. The default setting is
554 .
NOTE : After changing the default port numbers, the user can use the
“MultiUpgradeTool.exe”
to search and connect automatically.
9.3 Network > RTP
RTP port range, Multicast Setup
These settings are the IP address, port number, and Time-To-Live value to use for the
video stream(s) in multicast H.264 format.
Only certain IP addresses and port numbers should be used for multicast streams.