2.3
Adjusting the Camera Direction
The camera body is set in a 3-axis gimbal mount, allowing movement in the pan, tilt and
rotational planes. Adjust the direction of the lens so that it faces the subject.
2.4 Adjusting the Image and Focus
To adjust the position of the lens:
ZN-DT1A (Normal Lens)
1. Open the
Live View
page in your web browser.
- Select the
Setup
tab, and open the
Installation
page.
- Set ‘Installation Mode’ to ‘ON’ and select the ‘Video Format' (NTSC).
2. Connect analog monitor to the VIDEO OUT (BNC) on the cable.
- Unscrew the zoom puller on the lens by turning it counter-clockwise.
- Adjust the zoom setting and re-tighten the zoom puller.
- Unscrew the focus puller on the lens to adjust the focus, and re-tighten the focus puller.
3. Check the image from the
Live View
page on your web browser.
- Set ‘Installation Mode’ to ‘OFF’ to resume normal camera operation.
NOTE:
DC Auto-Iris should always be disabled while focusing the camera. This will set the iris to
the wide open position, which yields the smallest depth of field, and thus the best conditions for
focusing the lens. When the focus has been set by using this method, it will maintain its focus in
any kind of lighting conditions.
