PixelPro GXi Series
ZN1-D4FN5 Installation Guide
03-2014-A
9
4.2. Manual adjustment for 3-axis movements
Adjust the lens to the desired position by manually moving its upper lens shell, reinforced body
or horizontal platform in the following directions.
Caution
!
Refrain from continuously rotating the camera gimbal with excessive force to a
single direction as it is attached with a cable inside the dome.
4.3. Lens Focus Adjustment
B. Pan the lens with
reinforced lower body
C. Tilt the lens with
horizontal platform
A. Rotate the lens
with upper lens shell
Set Ring
Lens
1) Remove the dome cover with the
opener included in the package.
2) *Rotate the set ring in counterclockwise
will allow users to adjust the focal length of
the lens.
3) Adjust the focal length of the lens by
rotating the lens. After the setting, tighten
up the set ring by turning it clockwise.
4) Once the lens position is well-adjusted,
reverse all the steps in order to reassemble
the device.
* The lens focus is pre-adjusted, best at 3m
distance, when the camera is delivered out
of factory. It is recommended not to adjust
the lens focus unless it has to be.
Opener
