PixelPro GXi Series
ZN1-D4FN5 Installation Guide
03-2014-A
17
6.3. Reset
Perform the following procedures to reset your device:
1.
Press the reset button for 2 seconds while the device is in use.
2.
Wait for the system to reboot.
Caution
!
Please do not hold for more than 2 seconds. Otherwise, the camera may be
switched to its Factory Default settings.
6.4. Factory Default
Resetting the device back to the factory default will initialize all parameters including the IP
address back to the factory defaults. To reset back to the factory default:
1.
Press the reset button and hold.
2.
Release the button after 10 seconds.
3.
Wait for the system to reboot.
Note
i
The factory default settings can be inferred as follows:
IP address:
192.168.xx.yy
Network mask:
255.255.0.0
Gateway:
192.168.0.1
User ID:
root
Password:
pass
