PixelMASTER GXi Series NVR
User’s Manual
05-2014-A
38
38
6.2.2 MONITOR
NVR
’s resolution / screen switch can be changed here.
ALARM POP-UP MODE: When you set ON, an alarm input will cause the associated channel
to display full screen.
ALARM POP-UP DWELL: Determines how long the full screen popup is displayed after an
alarm event.
MOTION POP-UP MODE: When you set to ON, motion detection will cause the associated
channel to display full screen.
MOTION POP-UP DWELL: Determines how long the full screen pop-up is displayed after
motion detection.
If motion continues, the popup screen is displayed constantly.
VIDEO OUTPUT RESOLUTION (MAIN VIDEO OUTPUT MODE) : You can configure video
output resolution of main video from 1024x768 / 1280x1024 / 720p / 1080P 30Hz
OK:
click
OK
button to confirm modification works with your monitor. If you cannot
get image, please keep wait for 15 seconds. Monitor resolution will be back to
previ
ous setting automatically.
Depending on monitor doesn’t support HD resolution, then configure VGA resolution on NVR.
In case HD resolution like 720p/1080p connect with VGA cable, when installation, firstly connect
VGA cable and power on for NVR.
Factory default resolution is 1024x 768, so you should use monitor supporting at least
1024 x 768
.
VGA HORIZONTAL OFFSET: You can change the horizontal position of VGA.
VGA VERTICAL OFFSET: You can change the vertical position of VGA
SD VIDEO OUTPUT: Select the CVBS output mode.
MAIN : Display without GUI the multi-channel display live view of main monitor.
SPOT : Display the live view of spot monitor (1ch sequence).
DEFAULT SPOT CH: When you turn on the NVR, select the default ch to display.
