PixelMASTER GXi Series NVR
User’s Manual
05-2014-A
10
10
1.3 DESCRIPTION OF REAR PANEL
1
2
8
7
3
5
6
9
10
11
12
13
2
4
[Rear panel of 4CH NVR]
[Rear panel of 8 & 16CH NVR]
1.Power Switch
Switch to turn the NVR ON & OFF.
2.VGA Output (Video Graphic Array)
15-pin D-sub connector for the analogue VGA output.
3.Audio Inputs
RCA connectors for the audio signal inputs. (Line In)
4.Power In
12V DC Power socket.
5.Alarm(Sensor) Inputs, RS-485, and Relay Output
Alarm inputs x 4
RS-485 Signals. (G: Ground, D+: RX/TX + signal, D-:
RX/TX- signal)
4CH NVR: Relay output for the relay 1 (NO: Normal
Open, NC: Normal Closed, CM: Common)
8&16CH NVR: Relay output for the relay 2 (NO:
Normal Open, NC: Normal Closed, CM: Common)
6.Rear USB 2.0 (Only the 4CH NVR)
USB 2.0 ports. Provides functions like ‘Copy to
USB storage’, ‘Mouse’ and Etc.
7.DIGITAL VIDEO OUT (HDMI)
Digital video output for the main monitor.
8. CVBS Monitor Output
Composite video output for the main live screen or
the spot screen. (BNC)
9.RJ-45 Network Port( 1G Base-T)
Network port is used to 1G base-T, PC application
software or Mobile application.
10.RJ-45 Local Port( 1G Base-T)
User can make a connection between IP camera
and NVR through this port in case of using local
network already installed. IP address will be
automatically assigned as 192.168.172.100.
11.RJ-45 Cam(PoE) Port (100M Base-T)
User can make a connection between IP camera
and NVR as peer to peer mode(direct connection).
IP addess will be assigned in the range of
192.168.172.101 ~ 8, automatically.
(4CH NVR: 4ports / 8&16 NVR: 8ports)
12.Audio Outputs
RCA connectors for the audio signal outputs. (Line out)
13.PoE Power In (48V)
DC Power socket for POE Power.
14.eSATA Connection Port(Option)
connect e-SATA storage to expand HDD
