Ganz DR-16F44-AT, Installation Manual

Page: 13 / 18

１３
INSTALLATION
Connecting to an external device
Connecting to the monitor
This product supports 1080p 60 Hz HDMI monitors and regular monitors that support DVI and VGA
inputs. Connect an HDMI cable to the port on the product
’s rear bottom, or connect and HDMI-DVI
converter cable to connect a DVI monitor. Or, use VGA cable to connect the product
’s with a VGA
monitor.

Once the product is set for NTSC or PAL output, connect cameras of the corresponding
video standard for proper operations.
Power Connection
Plug the provided DC 12V adaptor in the rear power port of the DVR.

For stable operation of the product, it is recommended to use the provided adaptor.

Make connection when the power is not applied yet.

Arrange up the cables and be careful not to peel off the cable coating.

Do not place the power cord under the carpet or rug. The power cord is usually earth-
grounded. However, even if it's not earth-grounded, do never modify it on your own for
earth-grounding.

Do not insert multiple devices in a single power socket. Otherwise, it may cause a power
overload.