31
5. Menu
5-2. Alarm Input
5-3. Alarm Out
※ Configure the DVR Alarm Relay Output for each channel to
trigger relay output on alarm activations, video loss, or motion.
• Channel : Select Channel of Alarm Output
• Mode: Setup Relay in Latched or Transparent Mode.
• Type: Setup Relay Type as Normally Open or Normally Closed.
• Operation: Setup the Relay Connection with Alarm Sensor.
• Duration: Set the Amount of Time for Alarm Duration
(5 seconds ~ 5 minutes, or until manually cancelled from DVR)
• HDD Event: Set Alarm (On/Off) when HDD error occurs.
• Operation: Set Alarm/Sensor Connection Status
(Enable/Disable)
• Type : Set Alarm/Sensor as Normally Open or Normally Closed.
(N/O)
(N/C)
• Alarm Output Mode (Latched / Transparent)
Latched – When Alarm/Sensor is Activated, the Relay will Output for the Alarm Duration.
Transparent – Relay Output is temporary; only active while Alarm/Sensor is activated.
Tip
