34
PROTOCOL:
Must be set by Control Device.
BAUD RATE:
Must be set to match the baud rate of the PTZ controller.
EVENT / SENSOR
To setup the various event handling options, highlight EVENT/SENSOR and press
ENTER
EVENT / SENSOR: HDD EVENT
Click the
HDD EVENT
menu.
Then, click the value by button to change.
DISK FULL EVENT: If it sets to “ON” alarm output and buzzer are activated when HDD
becomes full.
EVENT / SENSOR : ALARM INPUT
Click the
ALARM INPUT
menu and click the
OPERATION
and TYPE value.
Then click the value by button to change.
