![background image](http://html1.mh-extra.com/html/ganz/digimaster-dr-16fx2/digimaster-dr-16fx2_operation-manual_561008016.webp)
16
System Setting
6. While the popup window is displayed, select
<SENSITIVITY>
to set the detection sensitivity.
> CHANNEL : select a channel to set the motion
Sensitivity.
> SENSITIVITY : 1(Low) ~ 15(High) - The higher
the number is, the more higher the sensitivity
level becomes.
> DAYTIME : Specify the time period that will be
considered as daytime.
- DAYTIME : specify the
<SENSITIVITY>
for the daytime.
- NIGHTTIME : specify the
<SENSITIVITY>
for the nighttime.
Images recorded in a low contrast scene such as at night cause severe noise, triggering the
motion event too often.
If unwanted events occur frequently at night, you may want to reduce the motion
sensitivity for the night duty.
PTZ Setup
You can configure PTZ cameras connected to each channel. Set the camera ID, protocol, baud rate
and PTZ control speed for each channel.
1. From
<SYSTEM SETUP>
-
<CAMERA>
, select
<PTZ SETUP>
.
2.Use the
[▲▼
◀▶
/ENTER]
buttons on the remote or
mouse to set protocol and baud rate.
Refer to user
’s manual of the PTZ the camera
or consult camera installer for further details
on PTZ settings, such as camera address,
protocol and baud rate.
3. To apply your changes, click
<APPLY>
button.
4. Once the setup completed, press the
[EXIT]
button of the remote control or click
<CLOSE>
button
on a confirmation dialog. Click <CANCEL> to return to the previous menu.