3
2. Operating and storage locations
(1) Do not attempt to aim the camera at the sun or other extremely bright objects that cause
smear to appear irrespective of whether the camera is operating or not. This can damage the
CCD (Charge Coupled Device).
(2) Do not place the camera in the following locations.
⁄
Locations subjected to extremely high or low temperature
¤
Locations under water.
‹
Locations subjected to excessive vibrations.
(3) When this camera is installed near the equipment, like a wireless communication device
that emits strong electromagnetic field, some irregularity such as noise on monitor screen
may happen.
3. Handling of the unit
Do not allow the camera to be subjected to strong impacts or shocks. The camera could be
damaged by improper handling or storage.
- Never attempt to disassemble or modify the camera.
- If any abnormality should occur, immediately turn off the power and consult your dealer.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
machine generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause interference, in which case the
user will be required to correct the interference at the userís own expense.
The CE Marking is a Directive Conformity mark of the European Union (EU).
