![background image](http://html1.mh-extra.com/html/gantner/gat-net-lock-7000/gat-net-lock-7000_manual_3409560005.webp)
5
www.gantner.com
Valid as from September 27
th
2013 • Technical data subject to modifications without notice!
DB_GAT-NET-Lock7000--EN_20.indd • Art.Nr.: 573734
Mounting procedure
Note: Before mounting all locks of the locker system a test installation of
at least one lock and final function check must be performed like
described below. Only if the tests are successful the rest of the
locks may be mounted in the same way.
1. Drill the 3 holes (3) for the GAT NET.Lock 7000 into the locker wall.
2. Plug-in the connection cable (see page 6).
3. Mount the GAT NET.Lock 7000 with 3 screws (3) on the inside locker
wall.
Note: Use the right screws according to the type of locker material.
Attention:
The max. allowed tightening torque of the screws
is 2 Nm.
4. On the inner wall of the locker door make the cut-out (62.6 x 68 mm)
for the GAT NET.Lock Bolt Set 7200.
5. On the inner wall of the locker door drill the 4 holes (6) for mounting
the GAT NET.Lock Bolt Set 7200.
6. On the outer wall of the locker door make the cut-out (67.6 x 93.5 mm)
for the label carrier.
7. Mount the bolt set onto the inside wall of the locker door by using 4
screws as shown in the figure on the previous page.
Note:
Only use Torx pan-head metal screws, Ø 3.5 mm, length 9.5 mm.
Attention:
The max. allowed tightening torque of the screws
is 2 Nm.
8. Push the label carrier onto the outside wall of the locker door. The
label carrier will hold in place with the lashes on the label carrier. No
screws are required.
9. Stick the front label (11) onto the label carrier.
Note: A customer-specific front label can be used to cover the LED
hole. A transparent field should be placed on the label to show
the LED light.
10. Close the door to test, if the locker door can be closed easily and if the
door shackle inserts into the opening of the GAT NET.Lock 7000.
3
3
3
3
2
2
6
7
1
6
9
6
6
10
7
123
11
7
3
3
4
5
1
Loc
ker wall
50.0 mm
6.0 mm
94.0 mm
1.0 mm
Loc
ker door (outside wall)
Loc
ker door (inside wall)
Loc
ker wall
74.0 mm
17.0 mm
17.0 - 17.5 mm
min. 18 mm
max. 26 mm
Inside of Locker
Locker Door
(Front view without lable carrier)
Locker Door
(Front view with lable carrier)
15.1 mm
32.6 mm
6
0.1 mm
Middle of the opening
for the door shakle
Loc
ker wall
Locker Door
(Front view with lable carrier)