4
www.gantner.com
Valid as from September 27
th
2013 • Technical data subject to modifications without notice!
DB_GAT-NET-Lock7000--EN_20.indd • Art.Nr.: 573734
1. GAT NET.Lock 7000
2. GAT NET.Lock Bolt Set 7200
3. Mounting screws for GAT NET.Lock 7000
4. Door shackle
5. Door contact
6. Mounting screws for bolt set
7. LED position
8. Cut-out for GAT NET.Lock Bolt Set 7200
9. Cut-out for label carrier
10. Label carrier
On the inside and outside walls of the
locker door cut-outs must be made in
order to mount the GAT NET.Lock Bolt Set
7200 and the label carrier. The mounting
procedure is described on the next page.
The measurements for the cut-outs are
shown in the figure to the left.
Mounting on Metallic Doors
Installation measures for GAT NET.Lock 7000 and Bolt Set
During the mounting, please pay particular attention to the following points:
- The door thickness must be between 18 and 26 mm (see figure).
- When the door is pressed shut, the gap between the bolt set (2) and the
front of the GAT NET.Lock 7000 must not be exceed 0.5 mm. Ideally the
bolt set should touch the front of the lock.
- The middle of the door shackle (4) must be 1 mm higher than the middle
of the door shackle opening in the GAT NET.Lock 7000. This ensures
the door’s ability to close even if the door position is modified 3 mm
downwards or 1 mm upwards (tolerance ±2 mm).
Cut-outs in the Locker Door
3
3
3
3
2
2
6
7
1
6
9
6
6
10
7
123
11
7
3
3
4
5
1
Loc
ker wall
50.0 mm
6.0 mm
94.0 mm
1.0 mm
Loc
ker door (outside wall)
Loc
ker door (inside wall)
Loc
ker wall
74.0 mm
17.0 mm
17.0 - 17.5 mm
min. 18 mm
max. 26 mm
Inside of Locker
Locker Door
(Front view without lable carrier)
Locker Door
(Front view with lable carrier)
15.1 mm
32.6 mm
6
0.1 mm
Middle of the opening
for the door shakle
Loc
ker wall
Locker Door
(Front view with lable carrier)
6
8
9
6
8
9
Loc
ker wall
LED
Lock bottom edge
Locker Door (Front view)
Cut-
Out on inside wall
Cut-
Out on outside wall
Loc
k base
63.4
65.9
0.8
46.6
17.6
6.6
80.4
79.1
11.1
4 x holes for screws,
Ø 3.6 mm, see step 7
on page 5
All measures in mm.
83.6
Loc
ker door (inside wall)
Loc
ker door (outside wall)
Inside of Locker
13.1
1.7