GAT ECO.Side Lock 7010 (NW) F/ISO
Installation
www.gantner.com
HB_GAT-ECOSide-Lock7010-FISO--EN_11
31
3.12.2 Installation Instructions for the GAT ECO.Side Lock 7010 F/ISO and Glass Doors
Complete the following steps to install the GAT ECO.Side Lock 7010 F/ISO into lockers with glass doors.
► Drill 3 holes (3 in Figure 3.15) for the GAT ECO.Side Lock 7010 F/ISO into the locker wall.
NOTE!
Position the 3 holes according to the information in section "3.12.1. Installation Requirements for the
GAT ECO.Side Lock 7010 F/ISO and Bolt Set" and the measurements in Figure 3.15.
► Insert the batteries into the GAT ECO.Side Lock 7010 F/ISO (see section “4.2.2. Inserting the Battery”).
► Mount the GAT ECO.Side Lock 7010 F/ISO with 3 screws (3) on the inside locker wall.
NOTE!
Use the correct screws according to the type of locker material, max. Ø 4 mm (0.16´´ ). The
maximum allowed tightening torque of the screws is 2 Nm (1.47 lb-ft).
► Use glass adhesive to attach the GAT NET.Lock BoltSet 7300 in the correct position to the inside of the glass
door. Observe the information in section "3.12.1. Installation Requirements for the GAT ECO.Side Lock 7010
F/ISO and Bolt Set" and the measurements in Figure 3.15.
NOTE!
Before the mass production of lockers begins, testing must be carried out by the locker manufacturer
to ensure that the glass adhesive meets the strength requirements. Always pay attention to the adhesive
manufacturer’s instructions.
► A label can be attached to the front of the locker door. The label has a transparent (matt) viewing window for
the LED to shine through and can be ordered with a GANTNER design or customer-specific design.
NOTE!
For customer-specific labels, ensure that a transparent field for the status LED is incorporated in the
design and that no metal foil or metal color are used.
► Test the locker door to confirm that it closes easily and that the door shackle inserts correctly into the GAT
ECO.Side Lock 7010 F/ISO. The locker door must spring open without assistance after it is unlocked.
Summary of Contents for GAT ECO.Side Lock 7010 F/ISO
Page 63: ......
