![background image](http://html1.mh-extra.com/html/gantner/benzing-m1/benzing-m1_manual_3405299056.webp)
BENZING M1 - Club
MENU FUNCTIONS
→
MISCELLANEOUS
52
HB_BENZING-M1_CLUB-EN_13.doc
GANTNER Pigeon Systems GmbH
5.5.4
Set the Type of Printer at the Club
Within this menu the type of printer which is used in the club to produce the print-outs is
selected. Possible types are a printer which only prints font (ASCII) ("Standard"), a dot
matrix printer with continuous paper ("Matrix") or a "PC Simulation". With the selection "PC
Simulation" you have the possibility to display the print-out on a connected PC before it is
printed. Therefore the software "PrtSim.exe" has to be installed and started on the PC. If
you then print with the BENZING M1, the print-out will be shown on the PC screen. From
the PC you can then send the print-out to a printer that is connected to the PC.
[
MISCELLA
] (blue)
L
[
ADJUST
] (red)
L
[
PRINTER
] (red)
L
Selected
printer
Cursor
mark
[
OK
] is only displayed after a new printer has
been selected.
L
[
] or [
]
- Move line marker (dark bar) up / down
L
[ ]
- Select type of printer -> marker
′
O’ is set.
L
[
OK
]
(green)- Confirmation of the selected type of printer.
Only after
L
this step the printer selection will be saved!
... Confirmation of selection of printer is displayed
L
Back to selection menu
′
Adjust’
TA PRINTER 18:25:22
′
Matrix’
activated!
TA PRINTER 18:24:58
~
Standard
.
{
Matrix
{
PC Simulation
QUIT OK