3
PB45 - W18XC1053 - Revised 230712
MACHINE SPECIFICATION
PB45
Machine Height
367mm (slide in down position)
Machine Width
145mm (without handles)
Machine Depth
280mm
Stroke
190mm
Machine Weight
20.0kg (tool and detachable parts)
Rated Motor Power
1150W
Voltage
110V / 230V AC
Rated Current
10.5A / 5.3A
IP Rating
IP20
Spindle Speed - load
250 / 450 /min
Spindle Speed - n
0
400 / 730 /min
No. of speeds
2 Gears
FWD/REV
No
Power Cord Length
2.5m
Insulation Class
CLASS I
Annular Cutter Capacity Ø50mm
Standard Cutting Depth
50mm
Twist Drill Capacity
Ø20mm with MT2 shank
Tapping Capacity
N/A
Countersink
Yes
Chuck Type
3/4” Weldon Shank Arbor or MT2
Spindle Fitting
MT2
Magnet Dimensions
200mm x 100mm
Magnet Power
75W
Magnetic Adhesion
1500kg (measured on 25mm thick plate)
Minimum Plate Thickness 12mm (minimum recommended)
Sound Pressure Level
86 dBA
Uncertainty 3 dBA
Sound Power Level
99 dBA
Uncertainty 3 dBA
SPL at Operators Head
89 dBA (1.55m high x 1m distance) Uncertainty 3 dBA
Hand-arm Vibration
Less than 2.5 m/s
2
Uncertainty 1.5m/s
2
.
The vibration measurement was made under standard conditions in accordance with the
requirements of BS EN 60129-1:2009.
The actual vibration level during use will depend on the workpiece stability/rigidity and the
condition of the cutter used. These factors may increase the vibration experienced by the
operator, each individual application of the tool should be assessed for the effect of these
application variable factors, before exposure.
.
