G&D VisionXS-IP-F-DP-UHR, Additional Instructions For Installation And Operation

Page: 83 / 148

Package contents
G&D VisionXS-IP-F-DP-UHR · 6
English
Signal transmission and transmission length
G&D’s KVM-over-IP™ technology makes it possible to transmit signals between the
computer and the user module compressed and encrypted (AES-128) using Gigabit
Ethernet (Layer 3).
If the bandwidth of the Gigabit Ethernet is sufficient, the video signal is reproduced
in a loss-free video quality and almost without any latency. By means of manual
bandwidth management you can adapt the transmission to different bandwidth
requirements (see Limiting the bandwidth on page 23).
When observing the max. length of sections between two active network components
(see section Features of transmission modules in the chapter Technical data ), the entire
transmission length is unrestricted.
Package contents
Standard package contents
 1 × computer module ( VisionXS-IP-CPU ).
 1 × user module ( VisionXS-IP-CON ).
 1 × video cable ( DP-Cable-M/M-2 )
 1 × USB device cable ( USB-AM/BM-2 )
 1 × service cable ( 2Micro-USB-Service-2 )
 1 × EasyStart flyer
 1 × »Safety instructions« flyer
Additional package contents of expanded variants
The package contents of expanded VisionXS-IP-F-DP-UHR variants additionally contain
the cables listed below.
DT VARIANTS
1 × power cable (PowerCable-2 Standard)
A VARIANTS
2 × audio cable (Audio-M/M-2)
AR VARIANTS
2 × audio cable (Audio-M/M-2)
1 × serial connection cable (RS232-M/F-2)