G&D VisionXS-IP-F-DP-UHR, Additional Instructions For Installation And Operation

Page: 124 / 148

Configuration
47 · G&D VisionXS-IP-F-DP-UHR
Adjusting the waiting period of the screensaver
The screensaver turns off the display of the console after the user has been inactive
for a defined period of time.
How to adjust the waiting period of the screensaver:
Conf
ig
Pan
el
1. In the menu, click on KVM extender .
2. Click on the computer module (CPU) you want to configure and then click
on Configuration .
3. Click on the tab General .
4. Click on the tab CPU if you want to change this setting of the
local workstation (on the CPU module).
Click on the tab CON if you want to change this setting of the
remote workstation (on the CON module).
5. In the USB auto refresh field of the Configuration section, select one of the fol-
lowing options:
Only faulty devices  The status of the USB devices is monitored.
If communication to a USB device is interrupted, this
device is reinitialised ( default setting ).
All devices
 All USB devices are reinitialised regularly.
Off  The connected USB input devices do not need
to be reinitialised.
6. Click on Save .
NOTE:
This setting does not affect the screensaver settings of the computer con-
nected to the computer module.
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row Console setup and press Enter .
3. Under Screensaver (min) enter a waiting period (1 to 999 minutes) for the
screensaver.
Entering the value 0 disables the screensaver .
4. Press F2 to save your settings.