G&D VisionXS-IP-F-DP-HR, Installation And Operation Manual

Page: 139 / 248

Installation
G&D VisionXS-IP-F-DP-HR · 10
English
Connecting the computer’s video output
DP CPU: Use the DP-Cable-M/M-2 cable to connect the computer’s video output to
this interface.
DP CPU 1:
Use the
DP-Cable-M/M-2
cable to connect the computer’s first video output
to this interface.
DP CPU 2: Use the additional DP-Cable-M/M-2 cable to connect the computer’s sec-
ond video output to this interface.
Connecting audio and RS232 interfaces (depending on model)
Line In: Use an Audio-M/M-2 audio connection cable to connect the omputer’s Line-
Out interface to this interface
Serial:
Use the
RS232-M/F-2
cable to connect one of the computer’s 9-pin serial inter-
faces to this interface.
NOTE: The DH variants allow the transmission of two separate video signals via
one transmission cable.
NOTE: By default, the KVM extender transfers audio data. The transmission of
RS232 data is deactivated.
You can enable the transmission of RS232 data and/or disable the transmission of
audio data (see (De)Activating signals on page 37).
Line In Serial USB CPU DP CPU Line In Serial USB CPU
Line In Serial DP CPU 1 DP CPU 2 USB CPU Line In Serial USB CPU
Line In Serial USB CPU DP CPU USB CPU DP CPU