G&D USB-Splitter-2, Installation Manual, Page: 30 / 40

Installation
8 · G&D USB-Splitter-2
Splitting and merging keyboard and mouse signals
In this operating mode, the
USB-Splitter-2
splits the keyboard and mouse signals
from the computer module coming in on
Port A
:

Keyboard signals: The Keyboard interface provides keyboard signals.
Use a converter ( Versalent WLKB232-024 , for example) to transmit this data to an
RS232 interface of the computer.
 Mouse signals:
The
Generic
interface provides incoming mouse signals.
Use a converter (
Versalent USBM232-024RR5
, for example) to transmit this data to
another RS232 interface of the computer.
Mode: Set the rotary switch to position 4 .
Keyboard: Connect the Versalent WLKB232-024 converter and then connect ot to an
RS232 interface of the computer.
Generic: Connect the Versalent USBM232-024RR5 converter and then connect ot to an
RS232 interface of the computer.
Port A: Use one of the supplied USB connection cables to connect the USB CPU inter-
face of the computer module to this interface.
NOTE: Use this operating mode to connect computers that transmit keyboard
and/or mouse signals via RS232 interface(s) to a computer module.
NOTE: Keyboard signals coming in at the Keyboard interface are merged with the
mouse signals coming in at the Generic interface. Port A provides them to the com-
puter module.
NOTE: Use a precision mechanic's screwdriver to adjust the rotary switch.
Service
Keyboard
Generic
Status
Fail
Power In
+ Loop
0
1
3
7
2
4
6
8
5
9
Mode Keyboard Generic
Port B
Port A
Port B
Status
Fail
Power Loop Port A