Configuration
25
· G&D TradeSwitch2-USB
Auto-accessing the first channel
Usually, after turning on the device, the recently active channel is accessed. The set-
ting can be changed so that the computer connected to the first channel is automati-
cally accessed when the device is turned on.
How to disable/enable the automatic access of the first channel after booting:
NOTE:
Use the setup menu to enable/disable the option to automatically access
the first channel after booting the device.
Se
tu
p Menu
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the
Arrow
or
Arrow
keys to select the
Select Ch.1 after Power up
row.
3. Press the
Space
key (repeatedly) to select between the following options:
No
Accesses the last active channel after booting
Yes
Accesses channel 1 after booting
4. Press the
S
key to save your settings.
Summary of Contents for TradeSwitch2-USB
