Configuration
13
· G&D DVIMUX4-DL-USB
Operating the setup mode
The setup mode can be enabled using the console keyboard. After enabling, the con-
figuration of the KVM switch can be changed by using various step keys.
How to enable the setup mode:
Press the
Backspace
(default:
Ctrl+Backspace
) key combination to enable
the setup mode.
How to perform a setup function:
After enabling the setup mode, press one of the setup keys described on the fol-
lowing pages.
How to end the setup mode without performing a function:
Press
ESC
to end the setup mode.
NOTE:
Only one setup function can be performed after the calling of the setup mode.
If you want to perform more functions, please restart the setup mode.
NOTE:
The successful activation of the setup mode is displayed by the blinking
NUM
,
and
Scroll
control LEDs on the keyboard. Additionally, the yellow
User
LED will blink at the KVM switch.
IMPORTANT:
The key combination to enable the setup mode needs to be pressed
for
seven seconds
.
After the first call of the setup mode, the hotkey delay can be disabled by pressing
the setup key
8