Installation
G&D DP1.2-VisionXG-Fiber ·
14
English
Establishing a connection to the computer module
Transmission|Tx:
Insert the LC plug of the fibre optic cable, which is connected to the
Transmission|Rx
interface of the computer module.
Transmission|Rx:
Insert the LC plug of the fibre optic cable, which is connected to the
Transmission|Tx
interface of the computer module.
Additional interfaces of expanded variants
Line In:
Connect a microphone to this interface if desired.
Line Out:
Connect the console speakers or another audio output device to this interface.
RS232:
Connect the serial end device to this interface.
USB 2.0 Devices:
Connect any USB device to these four interfaces.
IMPORTANT:
The device uses components with laser technology which comply
with laser class 1.
Never stare into the invisible laser beam when wearing optical instruments!
NOTE:
Remove the protection caps from the
Transmission
interface and the cable
plugs.
NOTE:
Connect at least one of the user module’s
Transmission
sockets (two fibres)
to the computer module.
If the bandwidth of the cable connection(s) is
insufficient
for the transmission of the
signals, image errors occur. In this case, connect other transmission sockets to the
computer module.
IMPORTANT:
The interfaces listed in this paragraph are only provided at certain
variants.
DP Out
Transmission
A
B
Network A
Network B
PS/2
Generic
Keyb./Mouse
USB 2.0 Devices
Host
Link
RS232
In
Out
Line
USB 2.0 Devices
Host
Link
PS/2
Generic
Keyb./Mouse
DP Out
Ready
Ident.
System
Fail
Network A
Network B
Summary of Contents for DP1.2-VisionXG-Fiber Series
