G&D DP1.2-Vision-Fiber, Installation And Operation Manual

Page: 104 / 152

Configuration
25 · G&D DP1.2-Vision-Fiber
Configuration
The configuration of the KVM extender can be changed either using the on-screen
display (OSD) or the web application Config Panel :
 The on-screen display is shown on the console monitor. Most configuration settings
can be changed directly on the OSD of the console.
 The web application Config Panel provides a graphical user interface to configure
and monitor the KVM extender via web browser.
Overview of functions and default settings
The following table provides an overview of the configurable functions of the KVM
extender. It additionally lists the default settings and references to detailed descrip-
tions of the functions.
Function Default setting Page
Changing hotkeys Ctrl 31
Changing the OSD key
Num
32
Opening the on-screen display via double keypress turned off 33
Changing the exclusive key Print 34
Changing the time span of the input lock 1 second 35
Right for exclusive access to the console given 36
Changing the video mode of consoles always on 37
Selecting the EDID mode of the KVM extender auto 39
Reducing the colour depth of the image data to be transmitted 24 bit 39
Freeze mode disabled 41
Enabling or disabling DDC/CI support disabled 43
Selecting the USB-HID mode PC Multimedia 44
Changing the scancode set of PS/2 keyboards scancode set 2 46
Adjusting the waiting period of the screensaver disabled 48
Selecting a keyboard layout for inputs via OSD German 49
Resetting the default settings 50