Configuration
G&D DP1.2-Vision-CAT ·
32
English
Related topics:
Operating the KVM extender exclusively
Changing the video mode of consoles
Changing the video mode of consoles
In the standard configuration of the KVM extender, the computer’s image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also define that the image of the other console is deactivated during con-
sole inputs.
The image of the other monitor is shown again as soon as the user has finished their
inputs at the console.
Conf
ig
Panel
1. Click on
KVM Extenders > [All Extenders]
on the directory tree.
2. Double-click the computer module of the KVM extender to be configured.
3. Click on the tab
Local
if you want to adjust the right for the local console (at
the
CPU
module).
Click on the tab
Remote > General
, if you want to adjust the right for the
remote console (at the
CON
module).
4. Under
Permanent Access mode
select one of the following options:
Enabled
right for exclusive access is granted (
default
)
Disabled
right for exclusive access is denied
5. Click
OK
to save your changes.
