G&D DP1.2-Vision-CAT, Installation And Operation Manual

Page: 86 / 132

Operation
17 · G&D DP1.2-Vision-CAT
Operation
The computer connected to the computer module ( DP1.2-Vision-CPU ) can be operated
at the remote console of the user module as well as at the local console of the com-
puter module.
After their initiation, both consoles are enabled to operate the computer.
Concurrent operation of the KVM extender
If a user carries out a keyboard or a mouse input, the KVM extender automatically
locks the input devices of the concurrent console. The lock is lifted if no inputs are
made at the active console during the adjusted timing of the automatic input lock
(default: 1 second).
After the automatic input lock has been lifted, both consoles are again able to oper-
ate the computer.
As an alternative to operate the computer concurrently via consoles, the exclusive
operation (see page 17) can be activated.
Related topics:
 Changing the time span of the input lock
on page 30
 Changing the video mode of consoles
on page 32
Operating the KVM extender exclusively
Activate the right for permanent access to operate the KVM extender exclusively
with one console.
If this function is activated, the extender’s exclusive operation can be activated by
pressing the hotkey
Print
(default:
Ctrl + Print
).
NOTE: The monitors of the remote and the local console of the KVM extender
always
display the same image at the same time.
The paragraph
Changing the video mode of consoles
on page 32 explains how this set-
ting can be changed.