Installation
G&D DP-Vision-Fiber ·
16
English
Connecting an additional interface of the CON-2 variants
Transmission|Tx:
Insert the LC plug of the fibre optic cable connected to the
Transmis-
sion|Rx
interface of a compatible computer module or matrix switch.
Transmission|Rx:
Insert the LC plug of the fibre optic cable connected to the
Transmis-
sion|Tx
interface of a compatible computer module or matrix switch.
Establishing the power supply
Main Power:
Insert one of the supplied IEC cables here.
Red. Power:
To provide a second, redundant power supply, connect a portable power
pack to this interface.
NOTE:
With the also available
CON-2
versions of the user modules, you can con-
nect a console to two
different
digital extenders of the
Vision
series.
Alternatively, you can connect a compatible matrix switch to each of the two
channels instead of a digital extender.
IMPORTANT:
The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the
Transmission
interfaces and the cable
plugs.
RS232
USB Devices
DP Out
Micro In Speaker
Transmission 2
Main P
ower
Transmission 1
Red. Power
Mouse
Keyb.
Generic
Keyb./Mouse
RS232
DP Out
Main P
ower
Red. Power
Transmission
USB 2.0 Trans.
Mouse
Keyb.
USB 2.0 Devices
Micro In Speaker
Generic
Keyb./Mouse
