G&D DP-Vision-CAT Series, Installation And Operation Manual

Page: 99 / 168

Installation
12 · G&D DP-Vision-CAT
Installing user modules
The remote console is connected to the DP-Vision-CAT-CON user module. The com-
puter connected to the computer module can be operated from this console.
Establishing a connection to a local network
Network:
Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
NOTE: If desired, connect the network interface to a local network. This enables
you to access the
Config Panel
web application from this network and to send sys-
log messages to this network.
Service
Network
Ident.
Main
Red.
Power
Video
Trans.
Channel
K/M
System
Status
USB Devices