G&D DL-DVI-Vision-IP-Fiber, Installation And Operation Manual

Page: 215 / 232

Configuration
94 · G&D DL-DVI-Vision-IP-Fiber
Adjusting the transparency of the OSD
In the default settings of the KVM switch, the OSD covers parts of the screen con-
tent. However, the parts of the screen contents covered by the OSD are still visible.
You can adjust the transparency level or turn the transparency off.
How to adjust the transparency of the OSD:
OSD
1. Press Ctrl+Num ( default ) to open the OSD.
2. Press F10 to open the Personal Profile menu.
3. Under OSD transparency press F8 to select on of the following options:
high  high transparency of the screen content
average  average transparency of the screen content ( default )
low  low transparency of the screen content
off  screen content is covered
4. Press F2 to save your settings.