Installation Guide
7
·
G&D CATCenter NEO
Connection via the
CATpro2-SUN-USB
target module
The target module
CATpro2-SUN-USB
is available in two versions (German and
American keyboard layout).
If a keyboard with American keyboard layout is applied at the user module, the
target module
CATpro2–SUN-USB-US
has to be used to connect the Sun computer.
If a keyboard with German layout is connected to the user module, proceed ac-
cordingly.
How to connect the target module
CATpro2-SUN-USB
to the matrix switch:
Unplug the monitor, keyboard and mouse cables from the interfaces of the
target computer.
Insert the 15-pin sub HD plug of the target module into the VGA interface of
the target computer to be connected.
Insert the USB-A plug of the target module into a free USB-A port of the target
computer.
Insert one end of the category 5 (or better) twisted pair cable into the RJ45
socket of the target module.
Connect the other end of the twisted pair cable to a
CPU
interface (RJ45 socket)
of the matrix switch
CATCenter NEO
.
Connection via the target module
CATpro2-VT100
How to connect the target module
CATpro2-VT100
to the matrix switch:
Connect the VT-100 device to the target module
CATpro2-VT100
. Use a serial
cable for this purpose.
Insert one end of the category 5 (or better) twisted pair cable into the RJ45
socket of the target module
CATpro2-VT100
.
Connect the other end of the twisted pair cable to a
CPU
interface (RJ45 socket)
of the matrix switch
CATCenter NEO
.