Installation
CAT-Repeater ·
5
English
Preparation
1. Install the digital master matrix switch.
2. Install the slave matrix switch you want to connect to the matrix switch using the
CAT-Repeater
expansion.
Since the expansion module connects the slave matrix switch to the matrix
switch at a later point, it is not necessary to connect the slave matrix switch at
this moment.
Installing the expansion module
Transmission CAT:
Use a CAT5 (or better) twisted pair cable to connect this interface to
a
Dynamic Port
in the
CPU
mode of the matrix switch.
Transmission Fiber:
Use a CAT5 (or better) twisted pair cable to connect this interface
to a
Dynamic Port
in the
CON
mode of the slave matrix switch.
Power In:
Connect the external power pack or the
power loop
cable, which is connected
to another expansion module, to this interface.
Power Loop:
If the external power pack is to supply power to another expansion mod-
ule, connect an optional power loop cable to this interface.
NOTE:
Detailed information regarding the power supply with power loop cables is
given on page 10.
Summary of Contents for CAT
Page 38: ......
Page 39: ...English...