GSWP300W-EVBPA
GaN E-HEMT Wireless Power Transfer Evaluation Board
Technical Manual
_____________________________________________________________________________________________________________________
GSWP300W-EVBPA Rev 220215
© 2022 GaN Systems Inc.
www.gansystems.com 2
Please refer to the Evaluation Board/Kit Important Notice on page 27
DANGER!
Electrical Shock Hazard -
Hazardous high voltage may be present on the
board during the test and even brief contact during operation may result in
severe injury or death. Follow all locally approved safety procedures when
working around high voltage.
Never leave the board operating unattended. After it is de-energized,
always wait until all capacitors are discharged before touching the board.
This board should be handled by qualified personnel ONLY.
PCB surface and devices can become hot. Contact may cause burns. Do not
touch!
CAUTION
This product contains parts that are susceptible to damage by electrostatic
discharge (ESD) or exposure to voltages in excess of the specified voltage.
Always follow ESD prevention procedures when handling the product.
Avoid applying excessive voltages to the power supply terminals or signal
inputs or outputs, always connected to the load during the test on-going.
