10
CD 3
Functions
Loading a disc
Pres Open button or the of the remote. The drawer will momentarily open and enable you to
load a CD.
Push the open button or of the remote, to close the drawer. Please allow the CD player to read
the Table of content before pushing any buttons on the face plate or on the remote control.
Playing an audio CD
After loading and TOC reading procedure is done, you can press the play button either on the cd
player itself or the on the remote control.
The player will now start by playing track #1 and continue all through the record until it is at the
end.
Selecting a track
Selecting a track can be performed by two ways:
1. After the TOC readout, you may press the next (either on the player or by the remote) button
a number of times until the track you prefer is displayed. If track #3 is preferred you have to pres
the next button three times. Otherwise you can use the direct controls on the remote control, by
pressing the . In any case the track # 3 is now displayed and you need to press the “Play” but-
ton, again you can chose to do this by the button on the front panel or by the remote.
2. After the TOC readout, you may press the “Play” button and the player now starts playing
track #1. Hit the next button once and it immidiatly jumbs to track #2. You can also use the di-
rect keys on the remote and command f.x. track # 5 directly while playing.
Replay present track
While playing f.x. track # 5 you can always replay or restart the track you are listening by press-
ing the “Play” button – or
the on the remote control and it will begin playing current track
from beginning.
Playing the previus track
If you like to play the previus track just pres the “Prev” button or the on the remote control.
Ex. You are playing track # 3 and you press the “Prev” button once, track # 2 is now displayed
and playing of the track will start momentarily. Press the button once again and track #1 will
start.
Playing the next track
If you prefer to jump the track you presently are listening, you may press the “Next” button or
the on the remote control. The next # of track will now appear in the display and playing will
begin momentarily.
Pause
If you wish to pause the music for a moment and then start from the exact spot in the record.
Press the “Pause” button or the of the remote.
During pause the CD will continue rotating and the laser will be right where it was when pause
was enabled until pause or is pushed once again.
