Appendix C -- Changing PCI4 Settings -- Removing a Potentiostat from an Existing System
6-7
Figure C-1
Portion of a Typical "GAMRY5.INI" File
[Framework5]
Version=5.0
SystemDir=C:\Program Files\Gamry Instruments\Framework 5\
ScriptDir=C:\Program Files\Gamry Instruments\Framework 5\Scripts\
PACKAGE0=DC105
[PCI4750-12345]
CMSDriver=PCI4.DLL
LABVIEWDriver=PCI4LV.DLL
BaseAddress=
PstatClass=PCI4
FraCurveClass=FRACURVE4
BoardNo=1
SerialNo=12345
Label=My PCI4
AuthDC105=1234567890
AUXDACRES=2.5E-3,0
…
[ECM8_1]
TYPE=ECM 8
LABEL=My ECM8
PORT=2
MODE=COM2:9600,N,8,1
SerialNo=12345
[DC105]
NAME=DC Corrosion
EXPT1=Corrosion Behavior Diagram,Corrosion Behavior Diagram.exp
EXPT2=Corrosion Potential,Corrosion Potential.exp
…
Using Notepad to alter "GAMRY5.INI"
It is often convenient to use an ASCII editor to make small changes in the "GAMRY5.INI" file. The Notepad
accessory included with Windows is a useful ASCII editor. Please read the Microsoft documentation for full
instructions about using Notepad.
Removing a Potentiostat from an Existing System
To remove a potentiostat from a system you need to physically remove the card set from the computer. You do
not need to make changes to the “GAMRY5.INI” file.
