Gamma X-6, Owner'S Manual

Page: 8 / 15

STRINGING THE FRAME
The drop weight is of a two piece design.
When assembled, it will accomodate ten-
sions from 20 lbs. to 90 lbs. For tensions
from 8 to 20 lbs., remove the 5mm bolt on the
face of the drop weight, and use the smaller
portion of the weight as described above.
Note: Tensions above 77lbs. require the
removal of the drop weight bar end cap.
Setting Tension
To set the stringing tension, loosen the lock-
ing knob on the side of the drop weight. Slide
the weight in the appropriate direction until
the face
closest to the string gripper is
indexed with the desired tension mark on the
tension bar.
Getting Started - Clamping the First Main
String
To begin stringing the main strings, thread
the two ends of the string through the two
center holes at the appropriate end of the
frame and continue through the opposite
center holes. Thread one end of the string
through the adjacent grommet hole and pull
the excess by hand. Using a floating clamp,
secure the center and the adjacent string to
each other on the inside of the frame.
7