Starburst 18x10– GAMMA LED Vision
Page 3 of 16
1.
Introduction and Setup
Unpacking
After receiving the device, please check whether any visible damage was caused during transport.
If the power cord, housing or the light are damaged, do not operate the device. Contact your
dealer or GAMMA LED Vision immediately.
Thank you for choosing our Starburst Par. This light is designed by high strength die- casting
aluminum which is able to endure high temperatures, and is designed in a stylish form.
It uses high power Red, Green, Blue, White, Amber, and UV LED’s for, low power consumption,
high brightness, and excellent colors. The Starburst par features DMX512 control, standalone,
and sound-active modes.
For your own safety, please read this manual before installing or using the device. This manual
covers the important information on installation and applications. Please install and operate the
fixture with following instructions. Meanwhile, please keep this manual for future needs.
In the Box:
Starburst Par LED - Power Cable - User Manual -
1 pc 1 pc 1 pc
Mounting and Operation
Use a clamp rated for the full weight of the Starburst Par to hang the fixture from the mount(s) on
the fixture’s yoke.
As an added safety measure be sure to attached at least one properly rated safety cable to the
fixture using on of the safety cable rigging point integrated in the base assembly or on the yoke.
Safety Precautions
Caution: For added protection mount the fixtures in areas outside walking paths, seating areas, or
in areas were the fixture might be reached by unauthorized personnel.
Caution: For added protection mount the fixtures in areas outside walking paths, seating
areas, or in areas were the fixture might be reached by unauthorized personnel.
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 items the device’s weight.
Fixture installation must always be secured with a secondary safety attachment, such as an
appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the fixture.
